Water-based acrylic emulsion for walls inside and out, tinted to any shade.
Range
Made for interior and exterior work.
Price on request
Call or message us for a quote
13 m² per litre, per coat
In stock
Finish
Pack sizes
4.5 L Gallon
GH₵0 · covers ~59 m²
10 L Bucket
GH₵0 · covers ~130 m²
20 L Pail
GH₵0 · covers ~260 m²
Not sure? Work out how much you need
Colour
Tinted to order at the plant. See the full shade card
This one is not priced online yet. Ask us for a quote; we will come back with a price per pack and what we have in stock.
Order on WhatsAppSpecially formulated using only highest quality imported materials, to give a tough, smooth, creamy finish with better covering and a brighter look. Suitable for both interior and exterior surfaces. Thin with 10% clean water to suit the applicator and apply by brush or roller. Over new work, prepare with Zigma Acrylic Stabilizing Solution, skim with Zigma Plaster for a smooth surface, seal again once dry, then paint.
Based on 13 m² per litre per coat for this product.
Surface
40.1 m²
Paint needed
6.17 L
Estimated cost
GH₵0
Buy
That is 9 L, a little over the 6.17 L calculated, which leaves enough for touching up.
An estimate. Porous, textured or previously unpainted surfaces drink more paint; allow around 15% extra on bare plaster.
No reviews yet
If you have used Zigma Acrylic Emulsion Paint, yours would be the first, and the most useful. It takes a minute, and we read every one before it goes up.
Ready-mix marble plaster in 45 shades, trowelled onto facades, columns and walls.
Price on request
0.33 m² per litre
PopularTough, strongly washable semi-gloss for walls and woodwork, inside and out.
Price on request
13 m² per litre
PopularProfessional surface preparation compound: fills cracks, holes and dents before paint.
Price on request
